1. ton na kayan aiki
Lokacin zabar tsarin gyare-gyaren samfuran samfuran SMC/GRP, tonnage na latsawa na hydraulic (gyare-gyaren latsa) za'a iya zaɓa bisa ga matsi na naúrar da samfurin ya ɗauka mafi ƙanƙanta.Don samfuran eccentric ko samfuran tare da manyan zurfin girma inda kayan gyare-gyaren ke buƙatar gudana a kaikaice, ana iya ƙididdige yawan adadin latsa bisa ga matsa lamba na yanki na samfurin har zuwa 21-28MPa.
2. Danna bude tsawo
Latsa buɗaɗɗen tsayi yana nufin nisa ta tsakiya daga madaidaicin wuri na katako mai motsi na latsa zuwa saman aikin.Dominna'ura mai haɗawa da matsawa kayan aikiZaɓin buɗewa gabaɗaya ya fi girma sau 2-3 fiye da tsayin ƙura.
3. Danna bugun jini
Latsa bugun jini yana nufin iyakar nisa wanda katako mai motsi na latsa zai iya motsawa.Don kayan haɗin gwiwamatsawa gyare-gyaren injibugun jini selection kamar mold tsawo 500mm, danna bude mu zabi 2.5 sau da mold tsawo na 1250mm, sa'an nan mu kayan aiki bugun jini ya kamata ba kasa da 800mm.
4. Latsa girman aikin aiki
Don ƙananan ƙwanƙwasa tonnage ko ƙananan samfurori, ana iya zaɓar teburin latsa daidai da girman ƙirar.A lokaci guda, gefen hagu da dama na latsa sun fi girma fiye da girman ƙira da 300mm a gefe ɗaya, kuma gaba da baya sun fi girma fiye da 200mm.Idan an samar da babban latsa mai girma ko babban samfur kuma yana buƙatar mutane da yawa don taimakawa wajen cire samfurin, ya kamata a yi la'akari da ƙarin girman wanda ke shiga da fita daga teburin latsa.
5. Daidaiton latsa worktable
Lokacin da aka yi amfani da matsakaicin ton na latsa daidai da 2/3 na yanki na tebur, lokacin da katako mai motsi da teburin latsa ke goyan bayan goyan bayan kusurwoyi huɗu, daidaiton shine 0.025mm / m.
6. Girman matsin lamba
Lokacin da matsa lamba ya karu daga sifili zuwa matsakaicin tonnage, lokacin da ake buƙata gabaɗaya ana sarrafa shi a cikin 6s.
7. Saurin latsa na yau da kullun
A karkashin yanayi na al'ada, an raba latsa zuwa sauri guda uku: saurin sauri shine gabaɗaya 80-150mm/s, saurin jinkirin shine gabaɗaya 5-20mm/s, bugun bugun dawowa shine 60-100mm/s.
8. Zhengxi na'ura mai aiki da karfin ruwa latsa gudun
Gudun aiki na latsa kai tsaye yana rinjayar fitarwar samfurin.Saboda la'akari da karuwa a cikin fitarwa na samfurin da kuma rage yawan ragowar samfurin, a yau kamfanin Zhengxi ya haɓaka da daidaita saurin aiki nahadaddiyar gyare-gyaren latsa.
Gudun aiki na latsa ya kasu zuwa gudu biyar:sauri 200-400mm / s, jinkirin 6-15mm / s, latsa (pre-compression) gudun 0.5-5mm / s, mold bude gudun 1-5mm / s, The mayar gudun ne 200-300mm / s. A halin yanzu, manyan saurin aiki guda biyar na latsawa na kamfanin ba kawai ƙara yawan fitar da samfuran abokan ciniki ba, amma daidaitawar saurin mai amfani kuma na iya kawar da lahani na samfur.
Na gaba, za mu haɗa teburin sigina na injin gyare-gyaren kamfanin mu don tunani.
Lokacin aikawa: Mayu-06-2021
